BIN Shellac-Base Interior and Spot Exterior Primer, Flat White, 1 gal Bucket/Pail, 2/Carton

Manufacturer: RUST-OLEUM CORPORATION
SKU: RST320991CT
Manufacturer part number: 320991CT
GTIN: 0020066367203
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Looking for a “silver bullet” primer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser® BIN® Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN® Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it's designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details). Paint Sub-Category: Primer; Shellac-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.
Looking for a “silver bullet” primer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser® BIN® Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN® Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it's designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details). Paint Sub-Category: Primer; Shellac-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.
Products specifications
Attribute nameAttribute value
Global Product TypeBuilding/Construction Paints & Primers
Footnote 1Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils
Disclaimer StatementB-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15°F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.
Footnote 2Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils
Age RecommendationAges 16 and Up
Application Temperature Range0º and 90ºF
Paint Sub-CategoryPrimer, Shellac-Based
Intended Application EnvironmentInterior/Exterior
Finish/SheenFlat
Packaging TypeBucket/Pail
Binder/Vehicle Ingredient(s)Shellac
Diluent/Solvent Ingredient(s)Water
Application MethodRoller
Recommended Level of VentilationModerate
Applicable Surface MaterialWood
Maximum Coverage Area500 sq ft
Cure/Dry-Time Range1-3 Days (Full Cure)
Pre-Consumer Recycled Content Percent0%
Post-Consumer Recycled Content Percent0%
Total Recycled Content Percent0%
Color FamilyWhite
Color(s)White
Volume Capacity1 gal
Product Biodegradability IndicatorN
Product Compostability IndicatorN
Product Biodegradability in Days0
*
*
*
Products specifications
Attribute nameAttribute value
Global Product TypeBuilding/Construction Paints & Primers
Footnote 1Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils
Disclaimer StatementB-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15°F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.
Footnote 2Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils
Age RecommendationAges 16 and Up
Application Temperature Range0º and 90ºF
Paint Sub-CategoryPrimer, Shellac-Based
Intended Application EnvironmentInterior/Exterior
Finish/SheenFlat
Packaging TypeBucket/Pail
Binder/Vehicle Ingredient(s)Shellac
Diluent/Solvent Ingredient(s)Water
Application MethodRoller
Recommended Level of VentilationModerate
Applicable Surface MaterialWood
Maximum Coverage Area500 sq ft
Cure/Dry-Time Range1-3 Days (Full Cure)
Pre-Consumer Recycled Content Percent0%
Post-Consumer Recycled Content Percent0%
Total Recycled Content Percent0%
Color FamilyWhite
Color(s)White
Volume Capacity1 gal
Product Biodegradability IndicatorN
Product Compostability IndicatorN
Product Biodegradability in Days0